Asked by machinists
Real questions from the shop floor — answered by the AI assistant from the knowledge base, then reviewed by the author before publishing.
What are the fundamental differences between G00 and G01 commands in CNC programming, and what is each used for?
ProgrammingJun 26, 2026→On Mitsubishi drives, I encountered alarm 3D which was resolved by increasing input power capacity. However, I also need to understand the troubleshooting steps for alarm 52 across different Mitsubishi drive models (MDS-E, MDS-C, and M70/M700/M800/M80 Series CNCs), as it has been indicated as 'Excessive Error 1' or 'Battery fault' depending on the model.
Alarms✓ expert reviewedJun 26, 2026→My Mitsubishi MDS-E drive is continuously showing Alarm 50 and Alarm 51. What are the possible causes for these alarms, and what steps should I follow to troubleshoot the issue?
AlarmsJun 17, 2026→How can I use the G10 command for tool offsets, workpiece coordinate offsets, parameter input, and tool life management on machines with Fanuc control systems? Also, what are the safety precautions and application points I should be aware of when using this command?
✓ expert reviewedJun 17, 2026→Your machine, your question
Describe the problem in your own words — the AI assistant answers from the full knowledge base with sources cited. Good questions get reviewed and published here.