Alarm 0014 (Software processing error 2) Diagnostic Tree

MitsubishiM70/M700/M800/M80 Series·2-step diagnostic tree·8 languages

Interactive troubleshooter

Step 1 of 2

Turn the NC unit power OFF and then ON again to clear the temporary software processing error.

↺ Restart from step 1

All diagnostic steps

STEP 1

Turn the NC unit power OFF and then ON again to clear the temporary software processing error.

STEP 2

If the alarm persists after a reboot, the NC system software may be corrupted or there is a hardware failure in the control unit. Contact the Mitsubishi service center or replace the control unit.