Alarm 0017 (A/D converter error) Diagnostic Tree

MitsubishiM70/M700/M800/M80 Series·2-step diagnostic tree·8 languages

Interactive troubleshooter

Step 1 of 2

Turn the power of the NC unit and the respective drive unit OFF and then ON again to clear the temporary A/D converter error.

↺ Restart from step 1

All diagnostic steps

STEP 1

Turn the power of the NC unit and the respective drive unit OFF and then ON again to clear the temporary A/D converter error.

STEP 2

If the alarm persists after restarting, the internal A/D converter circuit or control board of the drive unit is faulty. Replace the respective drive unit.